TacTile paving

Made from hardwearing stone and resin composite, the TacTile Paving system is an ideal alternative to traditional heavy concrete slabs. The lightweight properties and two part adhesive makes this the easiest tactile paving system to use all year round and under normal usage will last up to five times longer than the concrete equivalent.

  • Quick and easy to install
  • No excavation needed
  • Bonds to existing substrate including tarmac & concrete
  • Outperforms concrete
  • Conforms to DDA 2005 and DETR guidelines
  • 5 tactile profiles to choose from
Installs with: Our solvent free tactile paving adhesive

TMP range of TacTile Paving
Tactile blister paving tile

Each tile is 400mm (w) x 400mm (h)

Blister

For use at pedestrian crossing points, where the footway is flush with the carriageway to enable wheelchair users to cross

Data Sheet

Hazard Warning

Conveying the message ‘Hazard proceed with caution’ the hazard warning surface is used at steps, level crossings, the approach to light rapid transport (LRT) platforms and where a footway joins a shared route.

Data Sheet

Tactile hazard warning paving tile

Each tile is 400mm (w) x 400mm (h)

Tactile shared path paving tile

Each tile is 400mm (w) x 400mm (h)

Shared cycle track / footway

Used on shared cycle ways and footpaths and for conveying that the shared route is ending or crossing a carriageway.

Data Sheet

Guidance path

Used to guide visually impaired people along a route where traditional cues, such as property line or kerb edge are not available. It can also be used to guide people around obstacles, for example street furniture in pedestrianised areas.

Data Sheet

Tactile guidance path paving tile

Each tile is 400mm (w) x 400mm (h)

Tactile platform edge paving tile

Each tile is 400mm (w) x 400mm (h)

Platform edge

A uniquely manufactured fire resistant tile, which fulfils stringent requirements for underground stations. Widely adopted and approved throughout rail networks. The Off Street/Platform Edge Warning Surface can be installed at a rate of 120 linear metres per 4 hour possession.

Data Sheet

Adhesive

A solvent free rubber filled urethane gap filling adhesive with excellent bond strength and non slump characteristics make this ideally suited for bonding of polyurethane tactile tiles to concrete, asphalt and steel, etc. Outperforming all other tactile fixing systems available today in terms of strength, durability and costs.

Tactile paving is easy to install
TOP