Car Park
Car Park products and solutions
Did you know we started life in the Parking Industry in 1996? and although our focus in most recent years has been in the Highways & Lighting industries, rather than car park products, we haven’t abandoned our roots. Our principle of continuous improvement and development means that we now offer better quality products and services combined with real value for money. We hope you find what you need from the wide choice of products in our Parking Category but if you have a specific challenge or problem in mind, please let us know and we will aim to find the solution for you.
Blue Traffic Cone
Pegasus Sign Bollard
The Pegasus bollard is the ultimate sign carrying bollard for rectangular sign faces. With 305mm x 255mm signage capacity either side, the Pegasus is perfect for displaying disabled badge holder signs (661A) or enforcing other parking restrictions. Use our Bollard Builder below to customise your bollard.
Chevron Right – Car Park Sign Bollard
The TMP car park sign 'Chevron Right' is ideal for directing traffic flow, and warning of tight corners. With retro-reflective covering the sign can be seen perfectly in the low light of the car park making sure important information is always on hand.
- High-intensity Prismatic material 2-BS EN 12895-1:2001
- Reboundable
- Single Sided
- 3mm grey polypropylene
- Tested to withstand impacts at 60mph
Chevron Left – Car Park Sign Bollard
The TMP car park sign 'Chevron Left' is ideal for directing traffic flow , and warning of tight corners. With retro-reflective covering the sign can be seen perfectly in the low light of the car park making sure important information is always on hand.
- High-intensity Prismatic material 2-BS EN 12895-1:2001
- Reboundable
- Single Sided
- 3mm grey polypropylene
- Tested to withstand impacts at 60mph
Disabled Parking Only – Car Park Sign Bollard
The TMP car park sign 'Disabled Parking Only' is ideal for directing traffic into the right parking areas. With retro-reflective covering the sign can be seen perfectly in the low light of the car park making sure important information is always on hand.
- High-intensity Prismatic material 2-BS EN 12895-1:2001
- Reboundable
- Single Sided
- 3mm grey polypropylene
- Tested to withstand impacts at 60mph
Next Level Left – Car Park Sign Bollard
The TMP car park sign 'Next Level Left' is ideal for directing traffic through the maze of a car park. With retro-reflective covering the sign can be seen perfectly in the low light of the car park making sure important information is always on hand.
- High-intensity Prismatic material 2-BS EN 12895-1:2001
- Reboundable
- Single Sided
- 3mm grey polypropylene
- Tested to withstand impacts at 60mph
Next Level Right – Car Park Sign Bollard
The TMP car park sign 'Next Level Right' is ideal for directing traffic through the maze of a car park. With retro-reflective covering the sign can be seen perfectly in the low light of the car park making sure important information is always on hand.
- High-intensity Prismatic material 2-BS EN 12895-1:2001
- Reboundable
- Single Sided
- 3mm grey polypropylene
- Tested to withstand impacts at 60mph
No Entry – Car Park Sign Bollard
The TMP car park sign 'No Entry' is ideal for directing traffic into the correct path of flow, making it clear not to enter certain areas. With retro-reflective covering the sign can be seen perfectly in the low light of the car park making sure important information is always on hand.
- High-intensity Prismatic material 2-BS EN 12895-1:2001
- Reboundable
- Single Sided
- 3mm grey polypropylene
- Tested to withstand impacts at 60mph
Use Other Lane – Left – Car Park Sign Bollard
The TMP car park sign 'Use Other Lane, Left' is ideal for directing traffic through the maze of a car park. With retro-reflective covering the sign can be seen perfectly in the low light of the car park making sure important information is always on hand.
- High-intensity Prismatic material 2-BS EN 12895-1:2001
- Reboundable
- Single Sided
- 3mm grey polypropylene
- Tested to withstand impacts at 60mph
Use Other Lane -Right – Car Park Sign Bollard
Acrylic Convex Mirror
The acrylic convex mirror is terrific for security and safety. Placed at site entrances it will let you see oncoming traffic that would normally be blocked from view. The mirror is also well placed for enhancing security in carparks.
- Lightweight acrylic material
- Easy fixing with a bracket to a wall or pole
- 600mm diameter mirror
Grit Bin
The Grit Bin is essential for keeping us safe on the roads and paths today. It is especially useful in work yards where vehicles are moving about constantly. This bin holds up to 250 litres of grit or salt, ready for spreading on any wintery day.
- Tough moulded polyethylene
- Completely rot-proof
- Drain holes provided in the base
- One-piece fully integrated hinge
- Vandal resistant
Lockable Parking Post
Orange Traffic Cone
Traffic Cone ‘No Waiting’
Polycarbonate Convex Traffic Mirror
The polycarbonate convex mirror is terrific for security and safety. Placed at site entrances it will let you see oncoming traffic that would normally be blocked from view. The mirror is also well placed for enhancing security in carparks.
- Lightweight unbreakable polycarbonate material
- Easy fixing with a bracket to a wall or pole
- 600mm diameter mirror
Powerstart PS700 Vehicle Starter
Powerstart PS800 – Vehicle Starter
The TMP Powerstart PS800 is a heavy duty booster pack. Ideal for starts between charging or for frequent starting of any 12v vehicles including heavy types of diesel.
- Fully insulated cable clamps
- 1.7 metre cable reach
- Safety fuse 350A
- Polarity warning and spike protection
- Automatic 4A charger
- 12V DC, 2x20Ah battery
Speed Bump End Cap
The speed bump end caps come in pairs and are fixed to the ends of the speed bump sections to leave a smooth finish to the speedbump.
These speed bumps are ideal for placing near areas that drivers need to reduce speed and take care.
- Made from a tough recycled thermoplastic
- Bolt down holes for easy installation
- A chequered pattern for extra grip
2.4m Speed Bump – Ready To Install
The 2.4m Speed bump is made up of 4 middle sections plus two end caps. These bumps are ideal for calming traffic especially around vulnerable road users such as near schools.
- Overall length is 2440mm with end caps, 50mm high.
- Made from a tough recycled thermoplastic material.
- Bolt down holes for 12mm bolts.
- A chequered pattern for extra grip.
- Fixings included.
3.4m Speed Bump – Ready to Install
The 3.4m Speed bump is made up of 6 middle sections plus two end caps. These bumps are ideal for calming traffic especially around vulnerable road users such as near schools.
- Overall length is 3440mm with end caps, 50mm high.
- Made from a tough recycled thermoplastic material.
- Bolt down holes for 12mm bolts.
- A chequered pattern for extra grip.
- Fixings included.
Speed Bump Section – Black
Speed Bump Section – Yellow
