Showing 97–120 of 131 results

Essex 76mm Ring Polymer Embellishment

£69.00
Unlike traditional cast-iron or aluminium, our new non-metallic heritage lighting column embellishments do not need to be removed when testing the structural integrity of the column. This makes the process safer, quicker and cheaper!
  • To fit 76mm dia. shaft columns
  • Made from polymer and finished in Gloss Black
Patent Pending

Sheffield Cycle Stand Stainless Steel

From: £54.00
Our sheffield cycle stand in 304 grade stainless steel is a traditional and practical bike storage solution. Recommended by the National Cycling Association, these bicycle stands are a hugely popular choice. Dimentions: 750mm x 1100mm Root Fixed 750mm x 800mm Bolt Down

NAL Retention Socket

£65.89
NAL 50 x 50 Bollard Retention Socket Delivery Estimate: 3 - 5 Days Need it sooner? Call us on 0208 744 8201

Resin for City Post Installation

£60.00
The HILTI HIT-HY 200-A is the perfect injectable hybrid mortar for installing 6-8 City Posts into the ground using the anchor cup system.
  • Cures at temperatures as low as -5°C
  • Fast cure time
  • 500ml/890g
  • In service temperature range up to 120°C short term / 72°C long term
  • Suitable for dry and water saturated concrete

Traffic Bollard Retention Socket

£51.99
The TMP Retention Socket is the perfect foundation choice for bollards located in vulnerable areas that are prone to repeated knockdowns. Bollards can be installed and replaced in seconds, not only making it safer for the highway operatives but there are considerable traffic management and civils savings too!
  • 50x50 Retention Socket
  • Fast and safe bollard installation and replacement
  • More cost effective than traditional foundations

Speed Bump Section – Yellow

£46.50
This is a 500mm wide x 50mm high speed bump section in yellow. These bumps are ideal for calming traffic especially around vulnerable road users such as near schools.
  • Made from a tough recycled thermoplastic material
  • Bolt down holes for 12mm bolts
  • A chequered pattern for extra grip
  • End cap sections and fixings available separately

Speed Bump Section – Black

£46.50
This is a 500mm wide x 50mm high speed bump section in black. These bumps are ideal for calming traffic especially around vulnerable road users such as near schools.
  • Made from a tough recycled thermoplastic material
  • Bolt down holes for 12mm bolts
  • A chequered pattern for extra grip
  • End cap sections and fixings available separately

Epoxy Resin Adhesive – Tactile Paving

£45.00
Wet Use EP Resin
  • Use one tub per box of ten tiles

Speed Bump End Cap

£42.50
The speed bump end caps come in pairs and are fixed to the ends of the speed bump sections to leave a smooth finish to the speedbump. These speed bumps are ideal for placing near areas that drivers need to reduce speed and take care.
  • Made from a tough recycled thermoplastic
  • Bolt down holes for easy installation
  • A chequered pattern for extra grip

Traffic Separator FG300 Post – White

£41.00
This fantastic traffic separator is ideal for use in areas with high volumes of traffic. It is made from a white polyurethane, which is durable and economical.
  • Highly visible
  • UV, fuel and oil resistant
  • Unique cloverleaf design, enabling self-righting at any angle
  • Fast installation

Traffic Separator FG300 Post – Orange

£41.00
This impressive marker post is ideal for use in areas with high volumes of traffic . It is made from a orange polyurethane, which is durable and economical.
  • Highly visible
  • UV, fuel and oil resistant
  • Unique cloverleaf design , enabling self-righting at any angle
  • Fast installation

Traffic Separator FG300 Post – Black

£41.00
This fantastic traffic separator is ideal for use in areas with high volumes of traffic. This black traffic separator is made from black polyurethane that is highly durable and effective.
  • Highly visible
  • UV, fuel and oil resistant
  • Unique cloverleaf design, enabling self-righting from any angle.
  • Fast installation

TMP Ground Socket For Street Bollards

£40.20

The LockSafe® ground socket allows the TMP range of street bollards to be easily removed and replaced for temporary, permanent or semi-permanent applications. Damaged bollards can also be quickly replaced without expensive groundworks.
  • Fully compliant to BS EN 12767 100:NE:4
  • Concreted into the ground
  • Steel plug plate is sold separately to protect socket when it is empty.
  • Recyclable

Sheffield Cycle Stand Extra

£35.99
This Sheffield Cycle Stand has a cross bar to provide a second attachment point for locks. The stand will secure up to two bikes (one each side) and can be used for all bike sizes (including children’s bikes).
  • 100% steel
  • Galvanised or Painted option
  • Root Fixed or Bolt Down

Polyurethane Resin Adhesive – Tactile Paving

£35.00
Dry Use Resin
  • Use one tub per box of ten tiles

Sheffield Cycle Stand

£27.99
Our Sheffield Cycle Stand is a traditional and practical bike storage solution.
  • 100% steel
  • Galvanised or Painted option
  • Root Fixed or Bolt Down

Traffic Bollard Conversion Plate from Haldo to TMP

£27.50
The Type B Haldo Plate is designed for easy instalment of TMP Bollards where  Haldo bollards are currently placed. The plate is placed over the existing Haldo bollard base to covert it into taking TMP modern bollards.
  • Stainless steel plate
  • Quick installation
  • Avoids costly excavation works

Bollard Conversion Plate

£27.50
Our bollards can also be retrofitted to replace traditional base lit bollards, by using the Universal Conversion Plate, which allows easy installation without the need to excavate or remove the existing light box. The plates are manufactured from stainless steel and powder coated in matt black. *Haldo variant available.

Kingham Verge Marker

£26.99
The durable verge marker is made from polyethylene a hardy material perfect for use on our roads. The hazard marker is an economical solution for use on road to highlight dangerous verges, with its highly reflective red and white reflective bands road users, will not miss them.
  • Polyethylene blow moulded design.
  • EN 12899-1 Class R2 reflective sheeting.
  • 1200mm high.

Traffic Bollard Adapter Plate for TMP / NAL Retention Sockets

£26.89
Our retention socket adaptor allows any of our surface mounted traffic bollards, and many others on the market, to be compatible with the TMP or NAL 50x50 Retention Socket.
  • Compatible with: Evo-MAX, Evo-N, Evo-S, Flecta, Heritage and Metro TMP Bollards
  • Fits TMP or NAL 50x50 Retention Sockets
  • Ideal for high risk areas where frequent bollard replacement is needed.

Churchill Verge Marker Post

£26.49
The Churchill bollard is a plastic blow moulded verge maker. Easy to install and hard wearing, the Churchill post has a cylindrical design with hi vis reflective area conforming to RI EN12899-1 class R2 reflectors.
  • Multipurpose usage - highway verges / hard standing areas
  • EN 12899-1 Class R2 reflectors.

Bollard Removal Tool

£20.00
The TMP Solutions Bollard Removal Tool is designed to make installing and removing their Street Bollards a breeze.
  • Needed for removal and installation of bollards into ground sockets.
  • Compatible with TMP Apus, Cetus, Orion, Phoenix, Manchester, Munro, Pictor, Pictor Minor and Pegasus bollards only.

TMP Locksafe Socket Plug Plate

£20.00
The TMP Locksafe socket plug plate has been made to perfectly fit into the Locksafe socket to seal the hole when there isn't a bollard inserted into it. This plug is important to keep the socket clean and stop anyone tripping in the hole when it is empty.
  • Manufactured from steel with a protective zinc coating.
  • Easy to fit and take out when required.

Bollard Foundation Cage

£17.95
The Bollard Foundation Cage is manufactured from steel with a protective zinc coating.
  • Recommended for all new installations.
  • It's super easy to install, just concrete it in and bolt on your chosen bollard.