Material
Recyclable
Buy direct
2.4m Speed Bump – Ready To Install
The 2.4m Speed bump is made up of 4 middle sections plus two end caps. These bumps are ideal for calming traffic especially around vulnerable road users such as near schools.
- Overall length is 2440mm with end caps, 50mm high.
- Made from a tough recycled thermoplastic material.
- Bolt down holes for 12mm bolts.
- A chequered pattern for extra grip.
- Fixings included.
Tall Tubular Hazard Marker
Black Reflective Flat Hazard Marker
Essex 114mm Ring Polymer Embellishment
Unlike traditional cast-iron or aluminium, our new non-metallic heritage lighting column embellishments do not need to be removed when testing the structural integrity of the column. This makes the process safer, quicker and cheaper!
- To fit 114mm dia. shaft columns
- Made from polymer and finished in Gloss Black
Essex 76/140mm Collar Polymer Embellishment
Unlike traditional cast-iron or aluminium, our new non-metallic heritage lighting column embellishments do not need to be removed when testing the structural integrity of the column. This makes the process safer, quicker and cheaper!
- To fit 76/140mm dia. columns
- Made from polymer and finished in Gloss Black
Essex 89mm Ring Polymer Embellishment
Unlike traditional cast-iron or aluminium, our new non-metallic heritage lighting column embellishments do not need to be removed when testing the structural integrity of the column. This makes the process safer, quicker and cheaper!
- To fit 89mm dia. shaft columns
- Made from polymer and finished in Gloss Black
Essex 76mm Ladder Bar Polymer Embellishment
Unlike traditional cast-iron or aluminium, our new non-metallic heritage lighting column embellishments do not need to be removed when testing the structural integrity of the column. This makes the process safer, quicker and cheaper!
- To fit 76mm dia. shaft columns
- Made from polymer and finished in Gloss Black
Essex 76mm Ring Polymer Embellishment
Unlike traditional cast-iron or aluminium, our new non-metallic heritage lighting column embellishments do not need to be removed when testing the structural integrity of the column. This makes the process safer, quicker and cheaper!
- To fit 76mm dia. shaft columns
- Made from polymer and finished in Gloss Black
Short Tubular Hazard Marker
Resin for City Post Installation
The HILTI HIT-HY 200-A is the perfect injectable hybrid mortar for installing 6-8 City Posts into the ground using the anchor cup system.
- Cures at temperatures as low as -5°C
- Fast cure time
- 500ml/890g
- In service temperature range up to 120°C short term / 72°C long term
- Suitable for dry and water saturated concrete
Traffic Bollard Retention Socket
The TMP Retention Socket is the perfect foundation choice for bollards located in vulnerable areas that are prone to repeated knockdowns. Bollards can be installed and replaced in seconds, not only making it safer for the highway operatives but there are considerable traffic management and civils savings too!
- 50x50 Retention Socket
- Fast and safe bollard installation and replacement
- More cost effective than traditional foundations
TMP Ground Socket For Street Bollards
The LockSafe® ground socket allows the TMP range of street bollards to be easily removed and replaced for temporary, permanent or semi-permanent applications. Damaged bollards can also be quickly replaced without expensive groundworks.
- Fully compliant to BS EN 12767 100:NE:4
- Concreted into the ground
- Steel plug plate is sold separately to protect socket when it is empty.
- Recyclable
Traffic Separator FG300 Post – White
Traffic Separator FG300 Post – Orange
Traffic Separator FG300 Post – Black
This fantastic traffic separator is ideal for use in areas with high volumes of traffic.
This black traffic separator is made from black polyurethane that is highly durable and effective.
- Highly visible
- UV, fuel and oil resistant
- Unique cloverleaf design, enabling self-righting from any angle.
- Fast installation
Bollard Foundation Cage
Traffic Bollard Conversion Plate from Haldo to TMP
Bollard Conversion Plate
Our bollards can also be retrofitted to replace traditional base lit bollards, by using the Universal Conversion Plate, which allows easy installation without the need to excavate or remove the existing light box. The plates are manufactured from stainless steel and powder coated in matt black.
*Haldo variant available.
Traffic Bollard Adapter Plate for 50 x 50 Retention Sockets
Our retention socket adaptor allows any of our surface mounted traffic bollards, and many others on the market, to be compatible with the TMP or NAL 50x50 Retention Socket.
- Compatible with: Evo-MAX, Evo-N, Evo-S, Flecta, Heritage and Metro TMP Bollards
- Fits TMP or NAL 50x50 Retention Sockets
- Ideal for high risk areas where frequent bollard replacement is needed.
Kingham Verge Marker
The durable verge marker is made from polyethylene a hardy material perfect for use on our roads. The hazard marker is an economical solution for use on road to highlight dangerous verges, with its highly reflective red and white reflective bands road users, will not miss them.
- Polyethylene blow moulded design.
- EN 12899-1 Class R2 reflective sheeting.
- 1200mm high.
Churchill Verge Marker Post
The Churchill bollard is a plastic blow moulded verge maker. Easy to install and hard wearing, the Churchill post has a cylindrical design with hi vis reflective area conforming to RI EN12899-1 class R2 reflectors.
- Multipurpose usage - highway verges / hard standing areas
- EN 12899-1 Class R2 reflectors.
TMP Locksafe Socket Plug Plate
The TMP Locksafe socket plug plate has been made to perfectly fit into the Locksafe socket to seal the hole when there isn't a bollard inserted into it. This plug is important to keep the socket clean and stop anyone tripping in the hole when it is empty.
- Manufactured from steel with a protective zinc coating.
- Easy to fit and take out when required.
