Material
Recyclable
Buy direct
Resin for City Post Installation
The HILTI HIT-HY 200-A is the perfect injectable hybrid mortar for installing 6-8 City Posts into the ground using the anchor cup system.
- Cures at temperatures as low as -5°C
- Fast cure time
- 500ml/890g
- In service temperature range up to 120°C short term / 72°C long term
- Suitable for dry and water saturated concrete
Flat Blade Hazard Marker
These Flat Blade Hazard Markers are versatile sign bollards that are fantastic for identifying hazards and highlighting dangerous verges.
The bright yellow hazard markers with road signs on are perfect for directing traffic and giving direction in limited space as they are slight but still pack a punch visually.
Short Tubular Hazard Marker
Black Reflective Flat Hazard Marker
Essex 76mm Ring Polymer Embellishment
Unlike traditional cast-iron or aluminium, our new non-metallic heritage lighting column embellishments do not need to be removed when testing the structural integrity of the column. This makes the process safer, quicker and cheaper!
- To fit 76mm dia. shaft columns
- Made from polymer and finished in Gloss Black
Essex 76mm Ladder Bar Polymer Embellishment
Unlike traditional cast-iron or aluminium, our new non-metallic heritage lighting column embellishments do not need to be removed when testing the structural integrity of the column. This makes the process safer, quicker and cheaper!
- To fit 76mm dia. shaft columns
- Made from polymer and finished in Gloss Black
Essex 89mm Ring Polymer Embellishment
Unlike traditional cast-iron or aluminium, our new non-metallic heritage lighting column embellishments do not need to be removed when testing the structural integrity of the column. This makes the process safer, quicker and cheaper!
- To fit 89mm dia. shaft columns
- Made from polymer and finished in Gloss Black
Essex 76/140mm Collar Polymer Embellishment
Unlike traditional cast-iron or aluminium, our new non-metallic heritage lighting column embellishments do not need to be removed when testing the structural integrity of the column. This makes the process safer, quicker and cheaper!
- To fit 76/140mm dia. columns
- Made from polymer and finished in Gloss Black
Essex 114mm Ring Polymer Embellishment
Unlike traditional cast-iron or aluminium, our new non-metallic heritage lighting column embellishments do not need to be removed when testing the structural integrity of the column. This makes the process safer, quicker and cheaper!
- To fit 114mm dia. shaft columns
- Made from polymer and finished in Gloss Black
Tall Tubular Hazard Marker
2.4m Speed Bump – Ready To Install
The 2.4m Speed bump is made up of 4 middle sections plus two end caps. These bumps are ideal for calming traffic especially around vulnerable road users such as near schools.
- Overall length is 2440mm with end caps, 50mm high.
- Made from a tough recycled thermoplastic material.
- Bolt down holes for 12mm bolts.
- A chequered pattern for extra grip.
- Fixings included.
Essex 140mm Base Polymer Embellishment
Unlike traditional cast-iron or aluminium, our new non-metallic heritage lighting column embellishments do not need to be removed when testing the structural integrity of the column. This makes the process safer, quicker and cheaper!
- To fit 140mm dia. base columns
- Made from polymer and finished in Gloss Black
City Post Orange Traffic Separator – Bolt down
This TMP City Post traffic separator, is perfect for areas with high volumes of traffic, rebounding back to an upright position.  It has been tested vigorously having endured 100 impacts at 100 kmh and still standing.
- Traditional bolt down design
- Made of flexible polyurethane
- Remaining flexible at very high and low temperatures (-28°C to +75 °C)
- TSRGD compliant
- UV resistant
- 1 year limited warranty
- 360° visibility
Munro Bollard
FG-Kerb section
The FG-Kerb is an excellent choice for quickly delivering safety and visibility to new or existing cycle lanes. Designed to be used with FG-Posts.
- Fast and efficient bolt-down installation.
- Install in just minutes with one person.
- No manual handling issues weighing just 4kgs
- Virtually maintenance-free.
- Choice of colours.
- Incudes: 1 x kerb section. (No posts)
Manchester Bollard
The TMP Manchester bollard has been designed to replicate the look of traditional street bollards but at a fraction of the cost and is ideal for town centre locations.
NOW AVAILABLE -Â Manchester Bio - our Manchester bollard made from a bio-polymer derived from sugar cane.
Use Other Lane -Right – Car Park Sign Bollard
Use Other Lane – Left – Car Park Sign Bollard
The TMP car park sign 'Use Other Lane, Left' is ideal for directing traffic through the maze of a car park. With retro-reflective covering the sign can be seen perfectly in the low light of the car park making sure important information is always on hand.
- High-intensity Prismatic material 2-BS EN 12895-1:2001
- Reboundable
- Single Sided
- 3mm grey polypropylene
- Tested to withstand impacts at 60mph
Next Level Left – Car Park Sign Bollard
The TMP car park sign 'Next  Level Left' is ideal for directing traffic through the maze of a car park. With retro-reflective covering the sign can be seen perfectly in the low light of the car park making sure important information is always on hand.
- High-intensity Prismatic material 2-BS EN 12895-1:2001
- Reboundable
- Single Sided
- 3mm grey polypropylene
- Tested to withstand impacts at 60mph
Next Level Right – Car Park Sign Bollard
The TMP car park sign 'Next Level Right' is ideal for directing traffic through the maze of a car park. With retro-reflective covering the sign can be seen perfectly in the low light of the car park making sure important information is always on hand.
- High-intensity Prismatic material 2-BS EN 12895-1:2001
- Reboundable
- Single Sided
- 3mm grey polypropylene
- Tested to withstand impacts at 60mph
Disabled Parking Only – Car Park Sign Bollard
The TMP car park sign 'Disabled Parking Only' is ideal for directing traffic into the right parking areas. With retro-reflective covering the sign can be seen perfectly in the low light of the car park making sure important information is always on hand.
- High-intensity Prismatic material 2-BS EN 12895-1:2001
- Reboundable
- Single Sided
- 3mm grey polypropylene
- Tested to withstand impacts at 60mph
No Entry – Car Park Sign Bollard
The TMP car park sign 'No Entry' is ideal for directing traffic into the correct path of flow, making it clear not to enter certain areas. With retro-reflective covering the sign can be seen perfectly in the low light of the car park making sure important information is always on hand.
- High-intensity Prismatic material 2-BS EN 12895-1:2001
- Reboundable
- Single Sided
- 3mm grey polypropylene
- Tested to withstand impacts at 60mph
