Material
Recyclable
Buy direct
Blister Intermittent Glo Tactile Paving (10 tiles per box)
The tactile Blister paving is essential to the safety of visually impaired people navigating our busy streets. This profile underfoot gives warning to the change of a footpath that meets a road, where there are no kerbs to differentiate the two. Comprising of rows of flat-topped 5mm high blisters. Also available as Corduroy.
The Buff coloured variant is used for where there are controlled crossing points, such as zebra, pelican and puffin crossings. The red variant is put in place where there are uncontrolled crossing points such as side road crossings, kerb to kerb flat road humps and busy cross overs.
Corduroy Glo Tactile Paving (10 tiles per box)
The Tactile Corduroy paving is very important to pedestrians negotiating our footpaths. The profile differs from the Blister profile to convey a different message: ‘hazard, proceed with caution’.
The Corduroy highlights the presence of specific hazards such as steps, level crossings or the approach to on-street rapid transit platforms (LRT). Comprising of rows of 6mm high rounded bars running transversely across the direction of the pedestrians travel.
Blister Full Edge Glo Tactile Paving (10 tiles per box)
The tactile Blister paving is essential to the safety of visually impaired people navigating our busy streets. This profile underfoot gives warning to the change of a footpath that meets a road, where there are no kerbs to differentiate the two. Comprising of rows of flat-topped 5mm high blisters. Also available as Corduroy.
The Buff coloured variant is used for where there are controlled crossing points, such as zebra, pelican and puffin crossings. The red variant is put in place where there are uncontrolled crossing points such as side road crossings, kerb to kerb flat road humps and busy cross overs.
Blister Tactile Paving (10 tiles per box)
The tactile Blister paving is essential to the safety of visually impaired people navigating our busy streets. This profile underfoot gives warning to the change of a footpath that meets a road, where there are no kerbs to differentiate the two. Comprising of rows of flat-topped 5mm high blisters. Also available as Corduroy.
The Buff coloured variant is used for where there are controlled crossing points, such as zebra, pelican and puffin crossings. The red variant is put in place where there are uncontrolled crossing points such as side road crossings, kerb to kerb flat road humps and busy cross overs
Corduroy Tactile Paving (10 tiles per box)
The Tactile Corduroy paving is very important to pedestrians negotiating our footpaths. The profile differs from the Blister profile to convey a different message: ‘hazard, proceed with caution’.
The Corduroy highlights the presence of specific hazards such as steps, level crossings or the approach to on-street rapid transit platforms (LRT). Comprising of rows of 6mm high rounded bars running transversely across the direction of the pedestrians travel.
Manchester Bio Bollard
Evo-SightScreen
The Evo-SightScreen is a reboundable visibility screen designed to reduce the speed of vehicles on the approach to roundabouts. Completely modular, the Evo-SightScreen is built using the same components as the award-winning Evo-Chev and can be made to any length.
- Modular system
- Durable and economical
- Easy to install
- Recyclable
- BS EN 12767:2019 Passively Safe
Essex 76mm Ladder Bar Polymer Embellishment
Unlike traditional cast-iron or aluminium, our new non-metallic heritage lighting column embellishments do not need to be removed when testing the structural integrity of the column. This makes the process safer, quicker and cheaper!
- To fit 76mm dia. shaft columns
- Made from polymer and finished in Gloss Black
Essex 114mm Ring Polymer Embellishment
Unlike traditional cast-iron or aluminium, our new non-metallic heritage lighting column embellishments do not need to be removed when testing the structural integrity of the column. This makes the process safer, quicker and cheaper!
- To fit 114mm dia. shaft columns
- Made from polymer and finished in Gloss Black
Essex 89mm Ring Polymer Embellishment
Unlike traditional cast-iron or aluminium, our new non-metallic heritage lighting column embellishments do not need to be removed when testing the structural integrity of the column. This makes the process safer, quicker and cheaper!
- To fit 89mm dia. shaft columns
- Made from polymer and finished in Gloss Black
Essex 76mm Ring Polymer Embellishment
Unlike traditional cast-iron or aluminium, our new non-metallic heritage lighting column embellishments do not need to be removed when testing the structural integrity of the column. This makes the process safer, quicker and cheaper!
- To fit 76mm dia. shaft columns
- Made from polymer and finished in Gloss Black
Essex 140mm Base Polymer Embellishment
Unlike traditional cast-iron or aluminium, our new non-metallic heritage lighting column embellishments do not need to be removed when testing the structural integrity of the column. This makes the process safer, quicker and cheaper!
- To fit 140mm dia. base columns
- Made from polymer and finished in Gloss Black
Essex 168mm Base Polymer Embellishment
Unlike traditional cast-iron or aluminium, our new non-metallic heritage lighting column embellishments do not need to be removed when testing the structural integrity of the column. This makes the process safer, quicker and cheaper!
- To fit 168mm dia. base columns
- Made from polymer and finished in Gloss Black
Essex 114/168mm Collar Polymer Embellishment
Unlike traditional cast-iron or aluminium, our new non-metallic heritage lighting column embellishments do not need to be removed when testing the structural integrity of the column. This makes the process safer, quicker and cheaper!
- To fit 114/168mm dia. columns
- Made from polymer and finished in Gloss Black
Essex 89/168mm Collar Polymer Embellishment
Unlike traditional cast-iron or aluminium, our new non-metallic heritage lighting column embellishments do not need to be removed when testing the structural integrity of the column. This makes the process safer, quicker and cheaper!
- To fit 89/168mm dia. columns
- Made from polymer and finished in Gloss Black
Essex 76/140mm Collar Polymer Embellishment
Unlike traditional cast-iron or aluminium, our new non-metallic heritage lighting column embellishments do not need to be removed when testing the structural integrity of the column. This makes the process safer, quicker and cheaper!
- To fit 76/140mm dia. columns
- Made from polymer and finished in Gloss Black
Essex Embellishment Kit for 114/168 Lighting Columns
Unlike traditional cast-iron or aluminium, our new non-metallic heritage lighting column embellishment kits do not need to be removed when testing the structural integrity of the column. This makes the process safer, quicker and cheaper!
- To fit 89 /168mm dia. columns
- Kit includes: Ring, Collar, Base and Fixings
- Made from polymer and finished in Gloss Black
NonCrete Bio-Polymer Bollard
The award-winning NonCrete bio-polymer bollard is the perfect replacement for traditional concrete bollards. It’s easier to install and maintain, and better for the environment.
- Bio-polymer that looks like concrete
- Takes 4-5 minutes to maintain/ replace, minimising risk to operatives
- Just 3.5kg vs 80kg for a traditional concrete bollard
- 10.6 CO2e per NonCrete bollard compared to c.640 CO2e per traditional concrete bollard
- No manual handling issues
- Fully recyclable
We also offer alternative reflective banding colours.
Narrow Cycle Lane Defender with City Post
Churchill Verge Marker Post
The Churchill bollard is a plastic blow moulded verge maker. Easy to install and hard wearing, the Churchill post has a cylindrical design with hi vis reflective area conforming to RI EN12899-1 class R2 reflectors.
- Multipurpose usage - highway verges / hard standing areas
- EN 12899-1 Class R2 reflectors.
EcoLight Grey- Sign Light
Delivering industry-leading power efficiency, the EcoLight will illuminate traffic signs up to 1200mm and help you reduce carbon emissions on your network.
- Lightweight one-piece IP66 sealed sign light.
- Power consumption of only 2.6 watts
- 10 year warranty
Alpha – Sign Light
Completely redesigned and now entirely manufactured in the UK, the Alpha aluminium sign light has industry-leading power efficiency and will illuminate traffic signs up to 1200mm.
- Made from recycled aluminium.
- Anti-vandal IP66 rated body.
- Power consumption of only 2.6 watts
- 10 year warranty
EcoLight – Sign Light
Delivering industry-leading power efficiency, the EcoLight will illuminate traffic signs up to 1200mm and help you reduce carbon emissions on your network.
- Made from recycled material.
- Lightweight one-piece IP66 sealed sign light.
- Power consumption of only 2.6 watts
- 10 year warranty
