Material
Recyclable
Buy direct
Churchill Verge Marker Post
The Churchill bollard is a plastic blow moulded verge maker. Easy to install and hard wearing, the Churchill post has a cylindrical design with hi vis reflective area conforming to RI EN12899-1 class R2 reflectors.
- Multipurpose usage - highway verges / hard standing areas
- EN 12899-1 Class R2 reflectors.
Kingham Verge Marker
The durable verge marker is made from polyethylene a hardy material perfect for use on our roads. The hazard marker is an economical solution for use on road to highlight dangerous verges, with its highly reflective red and white reflective bands road users, will not miss them.
- Polyethylene blow moulded design.
- EN 12899-1 Class R2 reflective sheeting.
- 1200mm high.
Bollard Conversion Plate
Our bollards can also be retrofitted to replace traditional base lit bollards, by using the Universal Conversion Plate, which allows easy installation without the need to excavate or remove the existing light box. The plates are manufactured from stainless steel and powder coated in matt black.
*Haldo variant available.
Traffic Separator FG300 Post – Black
This fantastic traffic separator is ideal for use in areas with high volumes of traffic.
This black traffic separator is made from black polyurethane that is highly durable and effective.
- Highly visible
- UV, fuel and oil resistant
- Unique cloverleaf design, enabling self-righting from any angle.
- Fast installation
TMP Ground Socket For Street Bollards
The LockSafe® ground socket allows the TMP range of street bollards to be easily removed and replaced for temporary, permanent or semi-permanent applications. Damaged bollards can also be quickly replaced without expensive groundworks.
- Fully compliant to BS EN 12767 100:NE:4
- Concreted into the ground
- Steel plug plate is sold separately to protect socket when it is empty.
- Recyclable
Short Tubular Hazard Marker
Black Reflective Flat Hazard Marker
Essex 76mm Ring Polymer Embellishment
Unlike traditional cast-iron or aluminium, our new non-metallic heritage lighting column embellishments do not need to be removed when testing the structural integrity of the column. This makes the process safer, quicker and cheaper!
- To fit 76mm dia. shaft columns
- Made from polymer and finished in Gloss Black
Essex 76mm Ladder Bar Polymer Embellishment
Unlike traditional cast-iron or aluminium, our new non-metallic heritage lighting column embellishments do not need to be removed when testing the structural integrity of the column. This makes the process safer, quicker and cheaper!
- To fit 76mm dia. shaft columns
- Made from polymer and finished in Gloss Black
Essex 89mm Ring Polymer Embellishment
Unlike traditional cast-iron or aluminium, our new non-metallic heritage lighting column embellishments do not need to be removed when testing the structural integrity of the column. This makes the process safer, quicker and cheaper!
- To fit 89mm dia. shaft columns
- Made from polymer and finished in Gloss Black
Essex 76/140mm Collar Polymer Embellishment
Unlike traditional cast-iron or aluminium, our new non-metallic heritage lighting column embellishments do not need to be removed when testing the structural integrity of the column. This makes the process safer, quicker and cheaper!
- To fit 76/140mm dia. columns
- Made from polymer and finished in Gloss Black
Essex 114mm Ring Polymer Embellishment
Unlike traditional cast-iron or aluminium, our new non-metallic heritage lighting column embellishments do not need to be removed when testing the structural integrity of the column. This makes the process safer, quicker and cheaper!
- To fit 114mm dia. shaft columns
- Made from polymer and finished in Gloss Black
Tall Tubular Hazard Marker
Essex 140mm Base Polymer Embellishment
Unlike traditional cast-iron or aluminium, our new non-metallic heritage lighting column embellishments do not need to be removed when testing the structural integrity of the column. This makes the process safer, quicker and cheaper!
- To fit 140mm dia. base columns
- Made from polymer and finished in Gloss Black
Munro Bollard
Manchester Bollard
The TMP Manchester bollard has been designed to replicate the look of traditional street bollards but at a fraction of the cost and is ideal for town centre locations.
NOW AVAILABLE -Â Manchester Bio - our Manchester bollard made from a bio-polymer derived from sugar cane.
Disabled Parking Only – Car Park Sign Bollard
The TMP car park sign 'Disabled Parking Only' is ideal for directing traffic into the right parking areas. With retro-reflective covering the sign can be seen perfectly in the low light of the car park making sure important information is always on hand.
- High-intensity Prismatic material 2-BS EN 12895-1:2001
- Reboundable
- Single Sided
- 3mm grey polypropylene
- Tested to withstand impacts at 60mph
No Entry – Car Park Sign Bollard
The TMP car park sign 'No Entry' is ideal for directing traffic into the correct path of flow, making it clear not to enter certain areas. With retro-reflective covering the sign can be seen perfectly in the low light of the car park making sure important information is always on hand.
- High-intensity Prismatic material 2-BS EN 12895-1:2001
- Reboundable
- Single Sided
- 3mm grey polypropylene
- Tested to withstand impacts at 60mph
Chevron Left – Car Park Sign Bollard
The TMP car park sign 'Chevron Left' is ideal for directing traffic flow , and warning of tight corners. With retro-reflective covering the sign can be seen perfectly in the low light of the car park making sure important information is always on hand.
- High-intensity Prismatic material 2-BS EN 12895-1:2001
- Reboundable
- Single Sided
- 3mm grey polypropylene
- Tested to withstand impacts at 60mph
Chevron Right – Car Park Sign Bollard
The TMP car park sign 'Chevron Right' is ideal for directing traffic flow, and warning of tight corners. With retro-reflective covering the sign can be seen perfectly in the low light of the car park making sure important information is always on hand.
- High-intensity Prismatic material 2-BS EN 12895-1:2001
- Reboundable
- Single Sided
- 3mm grey polypropylene
- Tested to withstand impacts at 60mph
EcoLight – Sign Light
Delivering industry-leading power efficiency, the EcoLight will illuminate traffic signs up to 1200mm and help you reduce carbon emissions on your network.
- Made from recycled material.
- Lightweight one-piece IP66 sealed sign light.
- Power consumption of only 2.6 watts
- 10 year warranty
City Post Traffic Separator – Black
This TMP City Post traffic separator, is perfect for areas with high volumes of traffic, rebounding back to an upright position.  It has been tested vigorously having endured 100 impacts at 100 kmh and still standing.
- Made of flexible polyurethane
- Remaining flexible at very high and low temperatures (-28°C to +75 °C)
- TSRGD compliant
- UV resistant
- 1 year limited warranty
- 360° visibility
City Post Hazard Marker
This TMP Verge Marker, is perfect for highlighting roadside verges and rebounding back to an upright position if hit.  It has been tested vigorously having endured 100 impacts at 100 kmh and still standing.
- Made of flexible polyurethane
- Remaining flexible at very high and low temperatures (-28°C to +75 °C)
- TSRGD compliant
- UV resistant
- 1 year limited warranty
- 360° visibility
